研究领域

聚合物微孔发泡理论与工艺；塑料注射成型数值模拟

论文与著作

[1] Y. Wu, K. Yu, X. Zhang, J. Hou*, J. Chen*. Lightweight electromagnetic interference shielding poly(L-lactic acid)/poly(D-lactic acid)/carbon nanotubes composite foams prepared by supercritical CO2 foaming. Int. J. Biol. Macromol., 2022, 210: 11–20.

[2] J. Hou*, G. Zhao*, G. Wang. Polypropylene/talc foams with high weight-reduction and improved surface quality fabricated by mold-opening microcellular injection molding. J. Mater. Res. Technol., 2021, 12: 74–86.

[3] J. Hou, G. Zhao*, L. Zhang, G. Wang, B. Li. High-expansion polypropylene foam prepared in non-crystalline state and oil adsorption performance of open-cell foam. J. Colloid Interface Sci., 2019, 542: 233–242.

[4] J. Hou, G. Zhao*, G. Wang, L. Zhang, G. Dong, B. Li. Ultra-high expansion linear polypropylene foams prepared in a semi-molten state under supercritical CO2. J. Supercrit. Fluids, 2019, 145: 140–150.

[5] J. Hou, G. Zhao*, G. Wang, G. Dong, J. Xu. A novel gas-assisted microcellular injection molding method for preparing lightweight foams with superior surface appearance and enhanced mechanical performance. Mater. Des., 2017, 127: 115–125.

荣誉与奖励