数据通信技术与实践(Data Communication Tech...
周燕
目录
暂无搜索结果
1 项目1 校园网设计准备 Project 1 Campus Network Design Preparation
1.1 初识网络通信 Introduction to Network Communication
1.2 网络体系结构 Network Architecture
1.3 网络典型协议 Typical Protocols for Computer Networks
1.4 IP地址 IP Address
1.5 MAC地址 MAC Address
1.6 Packer Tracer的使用 The use of Packer Tracer
1.7 单元测验
2 项目2 校园网建设总体规划 Project2 Overall Plan of Network Construction
2.1 校园网建设需求分析 Demand Analysis of Campus Network Design
2.2 校园网整体拓扑结构设计 Overall Topology Design of Campus Network
2.3 校园网建设任务分解 Task Decomposition
2.4 单元测验
3 项目3 校园局域网组建 Project3 Establishment of Campus LAN
3.1 局域网技术简介 Introduction of LAN Technology
3.2 交换技术基础 Switching Technology
3.3 交换机数据转发方式 Switch Data Forwarding Method
3.4 交换机的功能 Functions of Switch
3.5 冗余环路问题 Problem of Redundant Loop
3.6 生成树协议 Spanning Tree Protocol
3.6.1 STP工作原理 Working Principle of STP
3.6.2 查看交换机运行STP状态 Checking the STP status of switches
3.7 单元测验
4 项目4 校园虚拟局域网组建 Project4 Establishment of Virtual LAN
4.1 VLAN简介 VLAN Introduction
4.2 VLAN成员模式 VLAN Member Mode
4.3 VLAN的划分方法 VLAN Partitioning Method
4.4 Trunk基本原理 Trunk Principles
4.5 Trunk配置方法 Trunk Configuration Methods
4.6 单元测验
5 项目5 虚拟局域网间通信 Project5 Routing between Virtual LANs
5.1 VLAN间路由基础 Inter VLAN Routing
5.2 单臂路由工作原理 Single-arm Routing Principle
5.3 单臂路由配置 Single arm routing configuration
5.4 三层交换技术 The Third Layer Switching Technology
5.5 三层交换技术的配置 Configuration of Layer 3 Switching Technology
5.6 单元测验
6 项目6 校园网路由设计准备 Project 6 Preparation forNetwork Routing
6.1 路由器基础 Router Fundamentals
6.2 Internet层协议 Internet Layer Protocol
6.3 IP地址的类型 Types of IP Addresses
6.4 子网掩码 Subnet Mask
6.5 IP地址配置 IP Address Configuration
6.6 子网划分的方法 Method of Subnet Partitioning
6.7 单元测验
7 项目7 静态路由实现校园网络互联 Static Routing for Network Interconnection
7.1 路由表 Routing Table
7.2 路由原理 Principle of Routing Selection
7.3 路由过程 Routing Process
7.4 路由协议类型 Routing Protocol Type
7.5 静态路由协议 Static Routing Protocol
7.6 特殊静态路由 Special Static Routing
7.7 静态路由协议配置 Configuration of Static Routing Protocol
7.7.1 静态路由配置
7.7.2 默认路由配置
7.7.3 浮动静态路由配置
7.8 单元测验
8 项目8 RIP路由实现校园网络互联 RIP Routing for Network Interconnection
8.1 距离矢量路由协议 Distance Vector Routing Protocol
8.2 RIP工作原理 Principle of RIP
8.3 RIP环路问题 RIP Loop Problem
8.4 RIPv1和RIPv2的区别 Difference between RIPv1 and RIPv2
8.5 RIP路由实现网络互联 RIP Routing for Network Interconnection
8.6 单元测验
9 项目9 OSPF路由实现校园网络互联 OSPF Routing for Network Interconnection
9.1 OSPF基础知识 Introduction of OSPF
9.2 OSPF特性 Characteristics of OSPF
9.3 OSPF数据包类型 OSPF Packet Type
9.4 OSPF工作原理 Principle of OSPF
9.5 OSPF网络类型 OSPF Network Type
9.6 OSPF的区域 Area of OSPF
9.7 OSPF网络的配置 Configuration of OSPF Network
9.7.1 点对点单区域网络的OSPF配置 OSPF Configuration for Point to Point Single Area Networks
9.7.2 不连续区域路由的配置 Configuration of Discontinuous Region Routing
9.7.3 综合网络配置
9.8 单元测验
10 项目10 校园网的安全设计 Security Design of Campus Network
10.1 访问控制列表基础知识 Basic Knowledge of ACL
10.2 访问控制列表类型 Access Control List Types
10.3 访问控制列表使用规则 Rules for using ACL
10.4 ACL的配置 Configuration of ACL
10.5 初识NAT Introduction of NAT
10.6 NAT分类 Classification of NAT
10.7 NAT配置 Configuration of NAT
10.8 单元测验
路由器基础 Router Fundamentals
上一节
下一节
选择班级
确定
取消
图片预览