电路分析基础

张玉山

目录

  • 1 电路模型和电路定律
    • 1.1 电路和电路模型
    • 1.2 电流和电压的参考方向
    • 1.3 电功率和能量
    • 1.4 电路元件
    • 1.5 电阻元件
    • 1.6 电压源和电流源
    • 1.7 受控电源
    • 1.8 基尔霍夫定律
  • 2 电阻电路的等效变换
    • 2.1 电路的等效变换
    • 2.2 电阻的串联和并联
    • 2.3 电阻的Y形连接和△形连接的等效变换
    • 2.4 电压源、电流源的串联和并联
    • 2.5 实际电源的两种模型及其等效变换
    • 2.6 输入电阻
  • 3 电阻电路的一般分析
    • 3.1 电阻电路的一般分析
    • 3.2 支路电流法
    • 3.3 独立电源的处理方法
    • 3.4 网孔电流法
    • 3.5 网孔电流法的实例分析
    • 3.6 结点电压法
    • 3.7 用结点电压的实例分析电路
  • 4 电路定理
    • 4.1 叠加定理
    • 4.2 齐性原理
    • 4.3 替代定理
    • 4.4 戴维宁定理
    • 4.5 诺顿定理
    • 4.6 最大功率传输定理
  • 5 储能元件
    • 5.1 电容元件
    • 5.2 电感元件
    • 5.3 电容、电感元件的串联与并联
  • 6 一阶电路的时域分析
    • 6.1 动态电路的方程及其初始条件
    • 6.2 一阶电路的零输入响应
    • 6.3 一阶电路的零状态响应
    • 6.4 一阶电路的全响应
    • 6.5 阶跃响应和冲激响应
  • 7 相量法
    • 7.1 正弦量
    • 7.2 相量法的基础
    • 7.3 电路定律的相量形式
  • 8 正弦稳态电路的分析
    • 8.1 阻抗和导纳
    • 8.2 电路的相量图
    • 8.3 正弦稳态电路的分析
    • 8.4 正弦稳态电路的功率
    • 8.5 复功率
    • 8.6 最大功率传输
  • 9 含有耦合电感的电路
    • 9.1 互感
    • 9.2 互感线圈的同名端
    • 9.3 含有耦合电感电路的计算
    • 9.4 含有耦合电感电路的计算的实例分析
    • 9.5 耦合电感的功率
    • 9.6 变压器原理
    • 9.7 理想变压器
  • 10 电路的频率响应
    • 10.1 网络函数与滤波器
    • 10.2 RLC串联电路的谐振
    • 10.3 RLC串联电路的频率响应
    • 10.4 RLC并联谐振电路-
    • 10.5 波特图
  • 11 非正弦周期电流电路和信号的频谱
    • 11.1 非正弦周期信号
    • 11.2 非正弦周期函数分解为傅里叶级数
    • 11.3 傅里叶系数与函数对称性的关系
    • 11.4 有效值、平均值和平均功率
    • 11.5 非正弦周期电流电路的计算
  • 12 线性动态电路的复频域分析
    • 12.1 拉普拉斯变换的定义
    • 12.2 拉普拉斯变换的基本性质
    • 12.3 拉普拉斯反变换的部分分式展开
    • 12.4 运算电路
    • 12.5 应用拉普拉斯变换法分析线性电路
    • 12.6 网络函数的定义和性质
    • 12.7 网络函数的应用
  • 13 实验
    • 13.1 基尔霍夫定律验证
    • 13.2 戴维宁定理验证和线性有源二端网络的研究实验
    • 13.3 一阶RC电路、示波器及信号发生器的使用实验
    • 13.4 日光灯功率因数的提高
    • 13.5 RLC串联谐振电路
  • 14 软件仿真
    • 14.1 MATLAB程序设计
    • 14.2 MATLAB绘图操作
    • 14.3 MATLAB在电阻电路中的应用
    • 14.4 MATLAB在动态电路时域分析中的应用
    • 14.5 MATLAB在频域分析中的应用
  • 15 英文部分——Chapter 1.Basic Concepts
    • 15.1 Introduction
    • 15.2 Systems of Units
    • 15.3 Charge and Current
    • 15.4 Voltage
    • 15.5 Power and Energy
    • 15.6 Circuit Elements
  • 16 Chapter 2
    • 16.1 Introduction
    • 16.2 Ohm’s Law
    • 16.3 Nodes, Branches, and Loops
    • 16.4 Kirchhoff’s Laws
    • 16.5 Series Resistors and Voltage Division
    • 16.6 Parallel Resistor and Current Division
    • 16.7 Wye-Delta Transformations
  • 17 Chapter 3.Methods of Analysis
    • 17.1 Introduction
    • 17.2 Nodal Analysis
    • 17.3 Nodal Analysis with Voltage Sources
    • 17.4 Mesh Analysis
    • 17.5 Mesh Analysis with Current Sources
    • 17.6 Nodal Versus Mesh Analysis
  • 18 Chapter 4.Circuit Theorems
    • 18.1 Introduction
    • 18.2 Linearity Property
    • 18.3 Superposition
    • 18.4 Source Transformation
    • 18.5 Thevenin’s Theorem
    • 18.6 Norton’s Theorem
    • 18.7 Maximums Power Transfer
  • 19 Chapter 5.Operational Amplifier
    • 19.1 Introduction
    • 19.2 Operational Amplifiers
    • 19.3 Ideal Op Amp
    • 19.4 Inverting Amplifier
  • 20 Chapter 6.Capacitors and Inductors
    • 20.1 Introduction
    • 20.2 Capacitors
    • 20.3 Series and Parallel Capacitors
    • 20.4 Inductors
    • 20.5 Series and Parallel Inductors
  • 21 Chapter 7.First-Order Circuit
    • 21.1 Introduction
    • 21.2 The Source-Free RC Circuit
    • 21.3 The Source-Free RL Circuit
    • 21.4 Step Response of an RC Circuit
    • 21.5 Step Response of an RL Circuit
  • 22 Chapter 9.Sinusoids and Phasors
    • 22.1 Introduction
    • 22.2 Sinusoids
    • 22.3 Phasors
    • 22.4 Phasor Relationships for Circuit Elements
    • 22.5 Impedance and Admittance
    • 22.6 Kirchhoff's Laws in the Frequency Domain
    • 22.7 Impedance Combinations
  • 23 Chapter 10.Sinusoidal Steady-State Analysis
    • 23.1 Introduction
    • 23.2 Nodal Analysis
    • 23.3 Mesh Analysis
    • 23.4 Superposition Theorem
    • 23.5 Source Transformation
    • 23.6 Thevenin and Norton Equivalent Circuit
    • 23.7 Op Amp AC Circuit
Inductors